Advice Included

FREE Shipping
at $150
Easy Returns &
Money Back Guarantee
Advice
Included
Questions?
1-888-300-0063

DRYPro Half Leg Waterproof Cast Cover

Stay 100% dry while swimming, showering or bathing with DRYPro. It's patented vacuum sealed technology is so air-tight and waterproof it can't even be pulled off!

Out of stock
SKU
DRYPro Half Leg Waterproof Cast Cover

The DRYPro waterproof cast cover is completely watertight, keeping your casts, bandages, and wounds dry. The DRYPro™ waterproof cast cover is the only leg and arm cast protection in the world with the patented vacuum seal to keep you dry. 

 The DRYPro waterproof cast cover fits snug, yet comfortably, offering protection during any water activity- showers, baths and even swimming. Unlike “modified garbage bag” products, the cast protection offered by the DRYPro™ waterproof cast cover is unmatched because it remains vacuum-sealed and in place, only removed when the seal is released by you. 

 So go ahead and ENJOY THE WATER!

  • Vacuum Sealed Technology
  • Completely Submersible Even for Swimming
  • Airtight Seal Prevents Cover from Coming Off
  • 90 Day Guarantee
  • Durable Surgical Rubber that Won’t Rip or Tear
  • Non-Skid Grid to Prevent Slipping
  • Typically Worn Below the Knee
  • Please note: color of pumps/bulbs may vary from picture
Write Your Own Review
You're reviewing:DRYPro Half Leg Waterproof Cast Cover

Latex Cover

Model #

Arm/Leg Circumference

Length

 

FL-12

7.5 – 11 inches

19 inches

Small Half Leg

HL-13

10 – 13 inches

21 inches

Large Half Leg

HL-15

13 inches & up

23.5 inches

FL-14

14 – 16.5 inches

29 inches

FL-16

16.5 – 21 inches

33 inches

FL-18

21 inches & up

37 inches

*Keep in mind, to achieve the best fit, consider both half and full sizes.

Measuring Circumference: Measure the circumference of the leg at 2 inches above the cast. If the end of the cast is very close to the knee, then measure mid-thigh. Do not measure around the cast! Only measure around the skin of the leg above the cast.

Measuring Length: Measure from the heel of the foot to 2 inches above the cast. It is okay if the cast protector measurement is longer then the limb measurement. The protector will still work. Extra length will be removed when the vacuum seal is created.

Stretch on the DryPro Leg Cover: Pull over the leg to see how it fits. If the DryPro is too tight, you can trim 1/4 inch along the lines towards the top of the opening and try it on again. Be sure not to trim too much, as a tight seal is needed for the vacuum to work. Stretch the DryPro over the cast or wound so the top fits smooth against the skin. Allow some slack as the vacuum will remove the excess material.

Messy plastic bags and tape are difficult to use and simply don't keep your cast waterproof. With the DryPro you are guaranteed a waterproof experience and a customer service team that will assist you with any questions or concerns you have.

Using Dry Pro™ products are as Easy as 1-2-3!

1. Slip it on: Stretch the Dry Proâ„¢ over the arm cast (sometimes easier to put a sock/stocking on first).

2. Make the vacuum seal: Pump out the air using the removable hand pump that is included.

3. Take it off: Let the air back in by lifting the Dry Pro™ from the skin, releasing the vacuum seal and sliding it off.

OrthoMed Policies are the Best In The Industry!

Fast Shipping, 30 Day Money Back on most items, and Easy Returns. Please note, some Exclusions and Conditions Apply for certain products. For full policy details, including exclusions and conditions: View Our Shipping Options and Policies

Features Include:

  • Patented Vacuum Sealed Technology
  • Completely Submersible Even for Swimming
  • Airtight Seal Prevents Cover from Coming off
  • Durable Surgical Rubber That Will Not Rip or Tear
  • Non-Skid Grid to Prevent Slipping
  • 90 Day Manufacturer's Warranty